This Tendak Optical SPDIF/TOSLink 4x2 Audio Matrix could put the four sets of SPDIF output signal source and two SPDIF input device connected. It can be easily split or switched between four SPDIF signal and two SPDIF signal receiving equipment. Especially support any 2 Inputs to any Output at the same time, even any 2 inputs to A and B Output at the same time.
- Combination of Switch and Splitter: 4 Inputs for Optical SPDIF / TOSLink sources and 2 Outputs for receiving terminals (amplifier, AVR, soundbar, headphones etc.); Supports any Input to any Output, or any 2 Inputs to Any Output at the same time, even any 2 inputs to A and B Output at the same time
- Support DTS-HD/Dolby-trueHD/LPCM2.0/DTS/Dolby-AC3/DSD audio format; Support PCM Stereo 32kHz, 44.1kHz, 48kHz and 96kHz (New & Play); Lossless of quality and signal transmission
- Control input/output device by pressing button or IR remoter; LED indicator status working, Support signal retiming, last time working state memory when power off. green light for 4 inputs source, red light A/B for 2 outputs audio device
- Supports output distance up to 40 Meters (130ft), Using optical fiber cable loss less 0.2Db/m. Over-voltage protection to prevent the damage caused by connecting unmatched power adapter to the machine, if the light for standby indication flashed, it shows that the output voltage from the power adaptor is too high and the adaptor needs to be changed.
- Offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments
Features:
-4 ways of optical input split or switch to 2 sets of SPDIF receiving device
-Support audio format: DTS-HD/ Dolby-trueHD/ LPCM2.0/ DTS/ Dolby-AC3/ DSD
-LED status indication, it can tell us the working state of the device very easily.
-Use optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m
-Select input through remote control or by pressing the button on unit
-Over-voltage protection when connecting unmatched power adapter
-Supports last time working state memory when power off
-No loss of quality, plug and play
-Supports signal retiming
Specification:
-Peak wavelength: 650nm
-Max baud rate: 16Mbps
-Output cable distance: up to 40m (Use the optical fiber cable loss less the 0.2Db/m)
-Max working current: 100mA
-Power Adapter Input: AC (50HZ, 60HZ) 100V-240V
-Power Adapter Output: DC5V/1000mA
Package Contents:
1 X Tendak Optical Audio True Matrix 4X2
1 X DC5V Power Adapter
1 X Remote Control
1 X User Manual
Warranty:
1 Year Limited Warranty by Tendak